⎝⎛真人游戏开户注册⎞⎠

Hello, welcome to the official website of Guangdong Xincheng Intelligent Engineering Co., Ltd. !
⎝⎛真人游戏开户注册⎞⎠│Message│Contact Us
Guangdong Xincheng Intelligent Engineering Co., Ltd.
Specializing in intelligent system integration to provide you with integrated monitoring system solutions
Website QR code
Alibaba
National Free Service Hotline 13929446347
4 monitoring project
Your location: ⎝⎛真人游戏开户注册⎞⎠- > Surveillance Engineering Solution- > Surveillance engineering company analyzes camera installation

Monitoring Engineering Company Analysis of Camera Installation


The specific installation method of the camera:

first step

Take out the bracket and prepare tools and parts: necessary tools such as plugs, screws, screwdrivers, hammers, electric drills, etc .; check the size and model of the plugs and self-tapping screws according to the predetermined installation position, try the bracket screws and Check whether the screw base of the camera base is suitable, whether the pre-buried pipeline interface is handled properly, test whether the cable is unblocked, and enter the installation program when ready.

The second step:

Introduction of the monitoring project, take out the camera, carefully install the lens according to the camera lens model and specifications determined in advance (the infrared integrated camera does not need to install a lens), be careful not to touch the lens and the CCD (marked in the figure) with your hand After it is firmly fixed, connect the power supply, connect the host computer or use a monitor, small TV, etc. to adjust the aperture focal length.

third step:

Take out the bracket, plug, screw, screwdriver, hammer, electric drill and other tools, and install the bracket according to the predetermined position. After checking firmly, mount the camera in the agreed direction;

the fourth step:

If you need to install a shield, install the shield directly from here after the second step. 1. Open the upper cover and rear bezel of the shield; 2. Pull out the fixed metal sheet and fix the camera; 3. Install the power adapter into the cover; 4. Reset the upper cover and back bezel and straighten the cable , Fixed, and mounted on the bracket.

the fifth step:

Insert the soldered video cable BNC plug into the socket of the video cable and make sure it is firmly fixed.

Step 6:

Insert the power output plug of the power adapter into the power socket of the surveillance camera, and confirm the firmness.

Step 7:

Connect the other end of the cable to the control panel or monitor (TV) and make sure it is secure.

Step eight:

Analysis of the monitoring engineering company, plug in the power of the monitoring host and the camera, and adjust the camera angle to a predetermined range through the monitor.

⎝⎛真人游戏开户注册⎞⎠│About Xincheng│Project Examples│Products│Monitoring Solution│Certificate of Honor│FAQs│Company News│Online Message│Contact Us
Copyright 2015 访问量: Guangdong Xincheng Intelligent Engineering Co., Ltd. Copyright © Copyright 2015 Visits: [ Baidu Statistics ]
Address: Room 101, No. 6 Zhenhua Street, Huangjiang Town, Dongguan City Service Hotline: 400-133-6128 Contact: Mr. Yu / 139-2570-6128 [BMAP] [GMAP] Guangdong ICP No. 15081993-1
* The relevant webpage materials and related resources of this site are from the Internet. If there is any infringement, please inform us quickly. We will delete it within 24 hours. [Background Management] Technical Support: Dongguan Website Construction
新金沙线上娱乐 七乐彩 欢乐拼三张 欢乐拼三张